Markbass Classic 300 Bass Amp
Description
Markbass Classic 300
Here's a beautiful example of how old and new technology can--and should--work together. The heart of the Classic 300 is its tubes. The brain is its microprocessor! Ten tubes give you the warmth and fullness of the great old amps that are now aging or retired. But times have changed. Don't you think it's about time you got an amp that took care of itself? The Classic's futuristic onboard microprocessor re-biases your tubes every time you start up the amp, allows you to customize your bias adjustments, and tells you if and when any tubes need to be replaced! Tube amps used to be finicky and unreliable. Now you won't have any nasty surprises on the gig, and you'll know exactly when and how your tubes need to be serviced. This handsome head puts out a loud 300 watts of power.
INPUTS
INPUT
impedance 500 Kohm, max. voltage 5 Vpp
EFFECT RETURN impedance 22 Kohm, max. voltage 15 Vpp
CONTROLS
GAIN
-60 dB to +35 dB range
MASTER VOLUME
GROUND LIFT switch on rear panel
EQUALIZATION
LOW
center frequency: 80 Hz; level: ±12 d
B LOW MID center frequency: 400 Hz, level: ±12 dB
HIGH MID center frequency: 800 Hz, level: ±12 dB
HIGH center frequency: 3 kHz, level: ±12 dB
OUTPUT
LINE OUT
balanced XLR, max. voltage 25 Vpp
EFFECT SEND unbalanced, max. voltage 18 Vpp (pre-EQ)
TUNER OUT unbalanced, max. voltage 2.5 Vpp
SPEAKER OUT 2x speakon/1/4" combo jacks
OTHER
WEIGHT
48.06 lbs / 21,8 kg
DEPTH 12.44 in. / 31.6 cm
HEIGHT 11.65 in. / 29.6 cm
WIDTH 19.76 in. / 50.2 cm
OPTIONAL FOOTSWITCH mute
OUTPUT POWER 300W @ 4 ohms or 2 ohms, 175W @ 8 ohms
POWER REQUIREMENT
100V; 120V; 230V; 240V
50/60Hz
(Voltage is factory preset according to region of sale)
The Classic 300 uses two ECC83 preamp tubes, two ECC99 tubes, and six KT88 power tubes, all manufactured by JJ Electronics.
Reviews
