Diago Powerstation PS01

Diago Powerstation PS01 Power Supply

The Diago Powerstation is the ultimate pedal board power supply. It will power from 1 to 30 pedals without noise or hum.


Here’s Diagos’ “10 reasons why you should buy a Diago Powerstation”:

-It will power over 95% of pedals, including some quirky stuff like the Line 6 Stompbox Modelers (DL4, DM4, FM4 & MM4).

-It can power from 1 to 30 pedals (with enough daisy chain cables) with ease.

-It automatically supplies the required amount of current, up to 3,000mA which is:

           10 x most plug top / wall wart type power supplies
           6 x the Power Bank / Signal Flex
           4 x the £160 Voodoo Lab Pedal Power 2

-It's quiet - uses studio quality components for hum and noise free operation.

-It's small - much like the power supply you'd get with a laptop.

-It's light - so it can be Velcroed down to your pedal board (Velcro supplied).

-It's tough - the heavy duty ABS case is durable and shock resistant.

-It's efficient - around 80% compared with around 45% for those mentioned above, so it doesn't get hot.

-It will work in any country without the need for step-up or step down transformers (accepts 90-264V AC input at 50-60Hz).

-It's safe - the design includes short circuit and voltage protection, and meets all national and international safety regulations so that you or your pedals won't fry!

What pedals will the Powerstation work with?
The daisy chains will power most 9V DC pedals that follow the Boss convention of 2.1mm, centre -ve barrel plugs, including most by Boss, Danelectro, Dunlop, Digitech, Ibanez, Korg, Morley, MXR and Zoom.

Compatability Chart
http://www.diago.co.uk/powerstation_compatibility.html

In the box:
1 x Diago Powerstation base unit.
1 x Deluxe Daisy Chain cable.
1 x 2m mains input cable.