Randall T2 400W Valve Dynamic Head

Randall T2 400W Valve Dynamic Head

Randall Amps started back in the 1940’s and is named after Don Randall, who started out as Leo Fender's partner and was the man responsible for Amplifier design.  Don decided to start his own company and develop new, more radical designs. This became the basis for the Randall Amplifier Company.

Randall builds a pro touring line of solid state amplifiers designed specifically to meet the demands of the modern guitarist. Their amps are road-worthy in their dependability and provide the tone that guitarists demand from their equipment.

Notable artists endorsing Randall include: Metallica, Anthrax, Disturbed, Linkin Park, Drowning Pool, Alice Cooper, Fear Factory, Arch Enemy and George Lynch to name a few.  

Randall T2 - A revolutionary power circuit called "Valve-Dynamic" is the engine that drives this new high powered head. This newly developed Tube driven Mosfet power section is driven by a 12AT7 for natural tube feel and compression. However, the key to this power circuit is the accuracy in frequency response of a full 100 watt tube power amp, which results in unbelievable dynamic all tube tone, feel, and response.

Randall T2 Specifications

• Two channel all tube preamp with 3 modes: 

• Mode 3: A boosted overdrive with punishing gain and liquid sustain.

• Mode 2: Classic overdrive channel for vintage to modern tube tone .

• Mode 1: Full tube clean with warm tone and big headroom.

• 400W @ 4 Ohms, 280W @ 8 Ohms, 500W @ 2 Ohms

• 3 midi switching channels

• Programmable Series or Parallel Effects loop with ingle On/Off switch. Can also be activated for any/all channels then stored and recalled by the included MIDI foot controller.

• Gain and Level controls for both channels.

• Master "Density" control. Adjusts the power amp low end dynamics.

• Master "Presence" control. Adjusts the power amp extreme high end dynamics

• MIDI in/thru

• Mic Eliminator XLR direct recording output

• World voltage selector/AC inlet